Getting HDR right on a PS5 is about more than making the screen brighter. Proper calibration helps preserve highlight detail, realistic colours and dark-scene visibility without unnecessary tone mapping.
- 1. Recommended PS5 Video Settings
- 2. Set Your TV Before HDR Calibration
- 3. How to Adjust HDR on PS5
- Go to:
- For an HGiG-focused calibration:
- For OLED displays:
- 4. PS5 HDR Calibration: Clicks vs Brightness
- 5. HDR Click Recommendations by Display
- 6. HGiG vs Dynamic Tone Mapping
- 7. In-Game HDR Settings
- After calibrating the console:
- 8. Check the Picture After Calibration
- Best PS5 HDR Baseline
For the most accurate starting point, use your TV’s Game Mode, enable HGiG if available, and calibrate the PS5 after changing your TV’s HDR settings.
1. Recommended PS5 Video Settings
Start with these settings before running HDR calibration:
| PS5 Setting | Recommended Value |
|---|---|
| HDR | On When Supported |
| Resolution | Automatic |
| Deep Color Output | Automatic |
| RGB Range | Automatic |
| 4K Video Transfer Rate | Automatic |
| 120 Hz Output | Automatic or On, if supported |
| VRR | Automatic or On, if supported |
Tip: If you experience 4K signal dropouts or flickering, try setting 4K Video Transfer Rate to -1 or -2.
Also enable your TV’s enhanced HDMI mode for the console input. Depending on the manufacturer, it may be called HDMI Deep Color, Input Signal Plus, Enhanced Format or something similar.
2. Set Your TV Before HDR Calibration
Before opening the PS5 calibration screen:
- Game Mode: Enable it to reduce input lag.
- HGiG: Enable it if your TV supports it.
- Dynamic Tone Mapping: Turn it off when using an HGiG-based calibration.
- Picture enhancements: Disable unnecessary AI processing, motion smoothing and other image enhancement features.
The goal is to let the console and game handle HDR tone mapping based on the display’s capabilities instead of having the TV remap the image again.
3. How to Adjust HDR on PS5
Go to:
Settings → Screen and Video → Video Output → Adjust HDR
The PS5 HDR calibration has three screens. The first two determine the display’s highlight brightness, while the third adjusts the black level.
Screen 1 and Screen 2: Peak Brightness
For an HGiG-focused calibration:
- Adjust the screen until the sun symbol is barely visible.
- Move one additional click so the symbol disappears.
- Repeat the same approach on the second screen.
This approach is intended to set the clipping point close to the display’s actual peak brightness. Results can vary depending on the TV’s HDR behaviour and tone-mapping implementation.
Screen 3: Black Level
For OLED displays:
- Set the slider to the minimum value.
- The sun symbol should be completely invisible.
For LCD and mini-LED displays, start at minimum as well. Raise it slightly only if shadow detail is visibly crushed.
4. PS5 HDR Calibration: Clicks vs Brightness
The following reference table provides approximate brightness values for the PS5 HDR calibration steps.
| Clicks from Minimum | Approx. Brightness |
|---|---|
| 0 | 107–110 nits |
| 1 | 124–126 nits |
| 2 | 145–147 nits |
| 3 | 170–171 nits |
| 4 | 196–199 nits |
| 5 | 226–231 nits |
| 6 | 262–268 nits |
| 7 | 309–311 nits |
| 8 | 358–360 nits |
| 9 | 403–416 nits |
| 10 | 475–482 nits |
| 11 | 549–557 nits |
| 12 | 634–643 nits |
| 13 | 732–743 nits |
| 14 | 853–858 nits |
| 15 | 985–990 nits |
| 16 | 1137–1143 nits |
| 17 | 1312–1319 nits |
| 18 | 1500–1522 nits |
| 19 | 1747–1757 nits |
| 20 | 2000–2028 nits |
| 21 | 2307–2341 nits |
| 22 | ~2688 nits |
| 23 | ~3105 nits |
| 24 | ~3588 nits |
| 25 | ~4147 nits |
| 26 | ~4797 nits |
| 27 | ~5450 nits |
| 28 | ~6428 nits |
| 29 | ~7450 nits |
| 30 | ~8637 nits |
| 31 | 10,000 nits |
Note: These are approximate community reference values, not guaranteed measurements for every TV. Panel behaviour and firmware can affect the result.
5. HDR Click Recommendations by Display
Use your TV’s measured peak brightness as a reference rather than blindly copying another display’s calibration.
| Display Peak Brightness | Suggested Clicks (Screens 1 & 2) |
|---|---|
| 700–800 nits OLED | 13–14 |
| 900–1000 nits | 15 |
| 1200–1500 nits | 16–18 |
| Around 2000 nits | 20 |
| Very bright mini-LED | 22–25 or higher, depending on tone mapping |
A practical starting point if you don’t know your TV’s peak brightness: 15 clicks.
That is approximately 985–990 nits according to the reference table.
6. HGiG vs Dynamic Tone Mapping
| Setting | What It Does |
|---|---|
| HGiG | Lets the game and console handle HDR mapping based on the display’s capabilities |
| Dynamic Tone Mapping | Adjusts brightness and tone mapping dynamically, often making the picture appear brighter |
| DTM Off | Avoids additional dynamic tone mapping from the TV |
For accuracy, HGiG is generally the preferred starting point when available. Dynamic Tone Mapping can make HDR look more vivid, but it may change the intended brightness and highlight presentation.
Some displays behave differently, so compare both modes if HGiG produces unusual clipping or brightness behaviour.
7. In-Game HDR Settings
After calibrating the console:
- Set the game’s peak luminance option to your display’s actual peak brightness, if the game provides one.
- Start paper white or HUD brightness around 200–300 nits, if the game uses a nit-based control.
- Adjust only after checking the game’s actual HDR presentation.
These values are starting points, not universal presets for every game.
8. Check the Picture After Calibration
Test both bright and dark scenes.
- Highlights: Bright lights, reflections and sunlight should retain detail rather than becoming flat white patches.
- Shadows: Dark areas should retain visible detail without looking washed out.
- HDR brightness: The image should look natural, not artificially boosted.
- Signal stability: Use a certified Ultra High Speed HDMI cable when required for your setup.
If the sun symbol never disappears during calibration, your TV may be applying additional tone mapping. Recheck HGiG or Dynamic Tone Mapping settings.
Best PS5 HDR Baseline
| Setting | Recommended Starting Point |
|---|---|
| HDR | On When Supported |
| Game Mode | On |
| HGiG | On, if supported |
| Dynamic Tone Mapping | Off when using HGiG |
| Adjust HDR Screens 1 & 2 | Around 14–16 clicks for many displays |
| Adjust HDR Screen 3 | Minimum |
| Resolution | Automatic |
| VRR | On/Automatic, if supported |
| 120 Hz | On/Automatic, if supported |
The best HDR calibration is the one that matches your display’s actual capabilities. Use these settings as a baseline, then fine-tune them based on your TV’s peak brightness, HDR behaviour and shadow detail.