What is StikDebug
StikDebug is an on-device debugger and JIT enabler for iOS 17.4 and newer, including the latest iOS 26.
It does not rely on Xcode, macOS-only tools, or tethered debugging.
- What is StikDebug
- What You Need (Mandatory Requirements)
- Download Everything
- Method 1: Install StikDebug Using iLoader (Recommended)
- Supported Platforms
- Step 1: Install iTunes (Windows Only)
- Step 2: Install and Launch iLoader
- Step 3: Sign In With Apple ID
- Step 4: Import and Install StikDebug IPA
- Step 5: Generate & Place the Pairing File
- Step 6: Install and Configure LocalDevVPN (Required)
- Step 7: Enable JIT Using StikDebug (On-Device)
- Method 2: Using SideStore (Alternative Method)
- Important Notes & Limitations
- Troubleshooting
- Frequently Asked Questions
- 1. Does StikDebug work on iOS 26?
- 2. Is jailbreak required?
- 3. Does JIT work fully on-device?
- 4. Is LocalDevVPN mandatory?
- 5. Does this work on Windows?
- 6. Is this method safe?
- Conclusion
StikDebug is:
- Fully on-device
- Non-jailbreak
- Powered by idevice
- Requires LocalDevVPN to function
- Installed via IPA sideloading
What You Need (Mandatory Requirements)
Downloads & Tools
You will need all of the following:
| Item | Purpose |
|---|---|
| StikDebug IPA | Main app |
| iLoader Tool | IPA sideloading |
| LocalDevVPN | Required for StikDebug to run |
| iTunes (non-Microsoft) | Device detection on Windows |
| Apple ID | App signing |
| Pairing File | Required for JIT |
Download Everything
| Tool / App | Download Link |
|---|---|
| StikDebug IPA | 👉 Download StikDebug IPA |
| iLoader Tool (Windows / macOS / Linux) | 👉 Download iLoader |
| iTunes (Apple Website – Not Microsoft Store) | 👉 Download iTunes |
| LocalDevVPN (App Store) | 👉 Download LocalDevVPN |
Method 1: Install StikDebug Using iLoader (Recommended)
Supported Platforms
- Windows
- macOS
- Linux
Step 1: Install iTunes (Windows Only)
If you are on Windows, you must install iTunes from Apple’s website, not the Microsoft Store version.
- Microsoft Store version ❌ does NOT work
- Apple website version ✅ REQUIRED
Step 2: Install and Launch iLoader
Install iLoader
Launch the tool
Connect your iPhone or iPad using USB
Unlock your device
Trust the computer if prompted
✅ Make sure your device is recognized inside iLoader
Step 3: Sign In With Apple ID
Inside iLoader:
- Log in using your Apple ID and password
- Wait for authentication to complete
This is required for IPA signing.
Step 4: Import and Install StikDebug IPA
- Click Import IPA
- Select the StikDebug IPA you downloaded earlier
- Wait for installation to complete
✅ Once finished, StikDebug will appear on your iPhone
Step 5: Generate & Place the Pairing File
StikDebug requires a pairing file to enable JIT.
In iLoader, click Manage Pairing File
On the next page, locate StikDebug
Click Place to install the pairing file
✅ Pairing file is now linked to StikDebug
Step 6: Install and Configure LocalDevVPN (Required)
StikDebug will NOT run without LocalDevVPN.
Open the App Store
Download LocalDevVPN
Launch the app
Complete the standard VPN setup
Enable the VPN
⚠️ If LocalDevVPN is disabled, StikDebug will not work
Step 7: Enable JIT Using StikDebug (On-Device)
Launch StikDebug on your iPhone
Tap Connect by App
Select the target app you want JIT enabled for
Done ✅
🎉 JIT is now enabled for the selected app
No computer required after this step.
Method 2: Using SideStore (Alternative Method)
Important Notes
- SideStore must be installed using iLoader
- Direct SideStore installs are NOT supported
- JIT flow inside StikDebug remains the same
Steps (High-Level)
- Install SideStore via iLoader
- Sign in with Apple ID
- Install StikDebug IPA through SideStore
- Use pairing file as described above
- Enable LocalDevVPN
- Enable JIT via Connect by App
Important Notes & Limitations
- JIT must be re-enabled after reboot
- JIT must be re-enable after force closing Apps
- VPN must stay enabled when using StikDebug
- Device must remain unlocked during JIT usage
- No jailbreak required
- No Xcode required
Troubleshooting
StikDebug Won’t Open
- Check LocalDevVPN is enabled
- Reboot device
- Re-enable VPN
Target App Not Showing
- App must be user-installed
- App must support JIT
- Reinstall pairing file
Device Not Detected in iLoader
- Use Apple-version iTunes
- Change USB cable
- Reboot PC and iPhone
If the device is still not recognised, watch this video:
Frequently Asked Questions
1. Does StikDebug work on iOS 26?
Yes. It supports iOS 17.4+ through iOS 26.
2. Is jailbreak required?
No.
3. Does JIT work fully on-device?
Yes. After setup, everything is on-device.
4. Is LocalDevVPN mandatory?
Yes. StikDebug will not function without it.
5. Does this work on Windows?
Yes, using iLoader + Apple iTunes (non-Microsoft).
6. Is this method safe?
Yes. No system files are modified.
Conclusion
StikDebug is currently the most accurate and reliable on-device JIT enabler for modern iOS versions (17.4–26).
When combined with iLoader, a pairing file, and LocalDevVPN, it provides a clean, jailbreak-free solution that works on Windows, macOS, and Linux.
